Boring
Capacities : Electrical drive:
Size 1: 70
thru’ 300 mm - Electrical drive
Size 2 : 70
thru' 500 mm - Electrical or Pneumatic drive
Size 3 : 350
thru' 1100 mm - Electrical drive
Common
parameters :
Tool feed : radial and axial :
manual.
Length
of bore : 300 mm per setting.
Metal
turning speed : upto 18 Mtrs/min
Tolerances
on bore : + 0.04 mm
Alignment
flexibility : Infinite
Set-up
time : approx. 2 Hours (depending upon the
job)
Center-to-center
distances : Infinite
#
of locations machined simultaneously in a
fabricated structure : As many machines
The
main parts of the (standard) machine- 500 mm diameter
capacity are:
Reversible
Pneumatic motor
1
#
Two
speed Gear-box
1 #
Boring bar - 80 mm dia x 1800
mm long,hardened
1
#.
Boring
bar - 55 mm dia x 1800 mm long,hardened
1
#.
Support
plates
4
#
Marking
block
1
#
Mounting
brackets
4
#
Setting
rings
4
#
Guide
rods
2
#
Bushes
2
#
End
stopper
1
#
Boring
tool-holders
1
set
Facing
tool-holders
1
set
Tool-kit
1
set
Control
Panels and cables (for Electrical machine)
1
set
Pneumatic
hose with clamps (for Pneumatic machine)
1
length
PRICES
effective : Valid upto 2010
One
set PELICAN make Portable Boring Machine as per specifications
in the catalogue and to list of parts comprising a standard
machine F.O.R
Bombay : Local taxes extra, as applicable:
(1)
70 Ø thru' 300 Ø :
I.R
6,25,000/=
(2)
70 Ø thru 500 Ø : Electrical :
I.R
8,00,000/=
(3)
70 Ø thru 500 Ø : Pneumatic :
I.R
9,50,000/=
(4)
350 Ø thru' 1100 Ø :
I.R
14,00,000/=
1.1
Optional accessories , each , F.O.R prices:
i)
Boring bar , 55 x 1200 mm long hardened
& ground, with 16 mm square slots for
tools
Rs.
72,000
ii)
Boring bar , 55 x 2500 mm long hardened &
ground , with 16 mm square slots for tools
Rs.
85,000/-
iii)
Boring bar , 80 x 2500 mm long hardened &
ground , with 16 mm square slots for tools
Rs.
120,000/-
iv)
Boring bar , 80 x 4000 mm long , hardened
& ground , with 16 mm square slots for
tools:
Rs.
180,000/-
v)
Aligning bar : 55 x 5000 mm long , straightened
to 0.5 mm/1000:
Rs.
100,000/-
vi)
Support plates with bearings for 55 Boring
bar , 650 long
Rs.
72,000/-
vii)
Support plates with bearings for 80 Boring
bar , 650 long
Rs.
86,000/-
viii)
Setting rings for 55 Boring bar
Rs.
7,500/-
ix)
Setting rings for 80 Boring bar
Rs.
9,700/-
The
Portable Boring Machine is designed for capacities
70 mm thru’ 500 mm Ø in Boring
and 150 thru 650 mm Ø in Spot-facing.
The
accuracies possible in Boring are up to 0.04mm
on the entire Boring Ø range.
Plates
up to 250 mm thick with bores at any center-to-center
distances can be machined with axis deviations
limited to very close measurements.
The
machine has been designed to be assembled
in parts at site and hence can be carried
to any location, by two men. The flexibility
and convenient weight of parts make it ideal
for the machine to be located and positioned
accurately on the desired axis
The
key sub-assemblies of the machine i.e. Boring-bar,
Gear-Box and Drive Motor are assembled unto
each other via morse-tapers.
This
make it ideal for the machine to be located
and positioned accurately on the desired
axis.
The
heaviest part of the machine weighs approx.
65 Kgs..
The machine can be mounted for horizontal
, vertical or inclined operations.
The
machine has been designed to withstand rough
use.
Our
machines has been designed and used for
machining of Gas-cut or Welded bores and
can take cuts up to 6 mm on the tool-point.
Pelican Engineers
specializes in Portable Boring Machine, Portable Boring Machine in India,
Portable Boring Machine in Mumbai. We are the best Portable Boring Machines
Manufacturers in india. Boring Machine s our forte. Boring Machine Mumbai.
We deal in Portable Boring Machine, Portable Boring Machine in India, Portable
Boring Machine in Mumbai. We are the leaders int Portable Boring Machines
Manufacturers in india. Boring Machine s our forte. Boring Machine Mumbai
